Back to home
Ametek
 

IEC/EN 61000-4-4

A burst arises when a mechanical contact is open. Due to the switching process, an arc occurs.
Sources are circuit breakers in electrical circuits, high voltage switchgear, 110/230 V power supply systems, 24 V control lines.
A burst has a single pulse rise time/duration of 5 ns/50 ns from a source impedance of 50 Ω. Bursts of 15 ms duration with a repetition rate of 5 kHz (or 100 kHz) are applied every 300 ms.
The standard defines four basic test levels, all with repetition frequencies 5 or 100 kHz.
The level voltage depends on equipment being tested:
Power ports: 0.5 , 1, 2, 4 kV
Signal and control ports: 0.25, 0.5, 1, 2 kV

 
  • Product

    Description

     
  • NSG 3040-EFT (discontinued)

    NSG 3040-EFT (discontinued)

    Single function generator for EFT / burst pulses for immunity testing in compliance with IEC 61000-4-4 up to 4.8 kV

  • CDN 3043

    CDN 3043

    Three phase automatic 32 A coupling/decoupling networks (CDNs) for EFT/Burst and Surge

  • CDN 3043A

    CDN 3043A

    Three phase automatic 32 A coupling/decoupling networks (CDNs) for EFT/Burst and Surge

  • CDN 3061

    CDN 3061

    Single phase automatic 16 A coupling/decoupling networks (CDNs) for EFT/Burst, Surge, and Power Quality (Dips Interrupts & Variations) testing

  • CDN 3063

    CDN 3063

    Three phase automatic 32, 63 and 100 A coupling/decoupling networks (CDNs) for EFT/Burst and Surge

  • CDN 3063A

    CDN 3063A

    Three phase automatic 32 A coupling/decoupling networks (CDNs) for EFT/Burst and Surge

  • CDN 3425

    CDN 3425

    Burst/EFT Coupling Clamp

  • CDN 3083 Burst

    CDN 3083 Burst

    Three phase 690 VAC/1000 VDC 100 and 200 A manual coupling/decoupling networks (CDNs) for EFT/Burst

  • NSG 3040 (discontinued)

    NSG 3040 (discontinued)

    Multifunction generator for EFT/Burst (4.8 kV), Surge Combination Wave (4.4 kV), Dips Interrupts and Variations, and Magnetic Field testing. Choice of impulse modules depends on your testing needs.

  • NSG 3040A

    NSG 3040A

    Multifunction generator for EFT/Burst (4.8 kV), Surge Combination Wave (4.4 kV), Dips Interrupts and Variations, and Magnetic Field testing. Choice of impulse modules depends on your testing needs.

  • NSG 3060 (discontinued)

    NSG 3060 (discontinued)

    Multifunction generator for EFT/Burst (4.8 kV), Surge Combination Wave (6.6 kV), Surge Telecom 10/700, Ring Wave, Dips Interrupts and Variations, and Magnetic Field testing. Choice of impulse modules depends on your testing needs.

  • NSG 3060A

    NSG 3060A

    Multifunction generator for EFT/Burst (4.8 kV), Surge Combination Wave (6.6 kV), Dips Interrupts and Variations, Ring Wave (6.6 kV) and Magnetic Field testing. Choice of impulse modules depends on your testing needs.

  • NSG 3060-ANSI (discontinued)

    NSG 3060-ANSI (discontinued)

    Multifunction generator for Surge Combination Wave, Ring Wave, and EFT/Burst, for IEC and ANSI C62.41 & 45 testing.

  • NSG 3060-ITU (discontinued)

    NSG 3060-ITU (discontinued)

    Multifunction generator for Surge Combination Wave, Telecom Surge, and EFT/Burst, for IEC and ITU-T.K series testing.

 
 
 

Imprint

AMETEK CTS GmbH
Sternenhofstr. 15
4153 Reinach, Switzerland
Tel.+ 41 61 204 41 00
marketing.cts@ametek.com

Managing Directors:
Brian Huntsman
Astrid Wälchli Schreiber
VAT-ID: CHE-179.452.414
Register of companies: CH-280.4.015.069-3


 
 
By continuing to use the site, you agree to our Privacy and Cookie Policy.