- Teseq worldwide
-
Product
Description
-
NSG 4070C
The NSG 4070 is a multi-functional device for carrying out EMC immunity tests to accompany development and conformity testing in accordance to IEC / EN 61000-4-6, Namur and several automotive BCI standards.
-
BHA 9118
The BHA 9118 is a linearly polarised broadband antenna which is ideal for many applications particularly EMC/RF measurements.
-
CBA 1G-030D
1 MHz to 1 GHz 30 Watt Broadband Power Amplifier
-
CBA 1G-100D
1 MHz to 1 GHz 100 Watt Broadband Power Amplifier
-
CBA 1G-150D
80 MHz to 1 GHz 150 Watt Broadband Power Amplifier
-
CBA 1G-300D
80 MHz to 1 GHz 300 Watt Broadband Power Amplifier
-
CBA 1G-600D
80 MHz to 1 GHz 600 Watt Broadband Power Amplifier
-
CBA 1G-1200D
80 MHz to 1 GHz 1200 Watt Broadband Power Amplifier
-
CBA 100M-110
10 kHz TO 100 MHz 110 Watt Class A Broadband Amplifier
-
CBA 100M-400
10 kHz to 100 MHz 400 Watt Class A Broadband Amplifier
-
CBA 230M-035
150 kHz to 230 MHz 35 Watt Class A Broadband Amplifier
-
CBA 230M-080
150 kHz to 230 MHz 80 Watt Class A Broadband Amplifier
-
CBA 400M-110
10 KHz to 400 MHz 100 Watt Class A Broadband Amplifier
-
CBA 400M-260
10 kHz to 400 MHz 260 Watt Class A Broadband Amplifier
-
CBL 6111
The CBL 6111 is a high performance ultra wideband BiLog® antenna for emission and immunity EMC testing.
-
CBL 6112
The CBL 6112 operates over the unprecedented, wide range 30 MHz to 2 GHz.
-
CBL 6141
For RF EMC emission and immunity testing in compact anechoic chambers.
-
CBL 6143
The CBL 6143 has a unique matching network which will allow powers of up to 300 watts CW to be transmitted, making it suitable for most immunity measurements requiring fields of 10 V/m, or even greater.
-
CDN 3043
Three phase automatic 32 A coupling/decoupling networks (CDNs) for EFT/Burst and Surge
-
CDN 3063
Three phase automatic 32, 63 and 100 A coupling/decoupling networks (CDNs) for EFT/Burst and Surge
-
CBL 6144
The CBL 6144 gives an incredible antenna factor of only 3 dB at 26 MHz together with a useable VSWR making the CBL 6144 able to deliver 10 V/m with 80% AM modulation using an amplifier power of less than 500 W (chamber dependent) at 26 MHz.
-
CDN 3043A
Three phase automatic 32 A coupling/decoupling networks (CDNs) for EFT/Burst and Surge
-
CDN 3063A
Three phase automatic 32 A coupling/decoupling networks (CDNs) for EFT/Burst and Surge
-
CDN 3083 Burst
Three phase 690 VAC/1000 VDC 100 and 200 A manual coupling/decoupling networks (CDNs) for EFT/Burst
-
CDN 3083 Surge
Three phase 440 VAC/DC and 620 VAC/DC 100 and 200 A manual coupling/decoupling networks (CDNs) for Surge
-
CDN AF Series
CDN AF Series
-
CDN CAN Series
CDN CAN Series
-
CDN M Series
CDN M Series
-
CDN S Series
CDN S Series
-
CDN T Series
CDN T Series
-
CIP 9136A
The CIP 9136 probe has been manufactured to drawings and specifications laid down by QinetiQ.
-
DCP 0100A
This high power dual directional coupler has been specifically designed for EMC immunity applications.
-
FT 801
Ferrite tube for immunity test according to IEC / EN 61000-4-6, large diameter of 35 mm
-
IOB 4000
The Input/Output Box, in short IOB 4000, is an ideal addition for electromagnetic immunity test systems.
-
ISN S Series
ISN S series is designed for measurements on coaxial telecommunication lines.
-
ISN T2
The ISN T2 is designed for measurements on one unscreened balanced pair for cable cat. 3 and cat. 5.
-
ISN T4
The ISN T4 is designed for measurements on one or two unscreened balanced pairs for cable cat. 3 and cat. 5.
-
ISN T8-Cat6
The ISN T8-Cat6 is designed for measurements on up to four unscreened single balanced pairs with cable category cat. 6.
-
ITS 6006B
The ITS 6006B consist of an integrated RF signal generator, RF switch and EUT monitoring interfaces. The unit is designed for various radiated EMC applications in the 80 MHz to 6 GHz frequency range.
-
KEMA 801B
The KEMA 801B is recommended as an additional decoupling network (ferrite tube clamp) for immunity test according to IEC/EN 61000-4-6 when using the clamp injection method.
-
KEMZ 801
The normative Annex A of IEC/EN 61000-4-6 gives additional information regarding the clamp injection. The KEMZ 801 is similar to the described EM clamp in the standard and injects the disturbance signal through a combination of inductive and capacitive coupling.
-
MD 4070A
The monitoring device MD 4070 can be used as an active or passive current sensor probe to measure the current in a conductor without connecting it directly.
-
NSG 435 ESD SIMULATOR
Electrostatic Discharge (ESD) simulator for immunity testing in compliance with IEC 61000-4-2, up to 16.5 kV
-
NSG 437 ESD SIMULATOR
Electrostatic Discharge (ESD) simulator for immunity testing in compliance with IEC61000-4-2 and ISO10605, up to 30 kV.
-
NSG 438 FLAGSHIP ESD SIMULATOR
Electrostatic Discharge (ESD) simulator for immunity testing in compliance with IEC61000-4-2 and ISO10605, up to 30 kV.
-
NSG 439 ESD SIMULATOR
Electrostatic Discharge (ESD) simulator for immunity testing in compliance with IEC 61000-4-2 and ISO 10605, up to 30 kV. Designed especially for robotic applications.
-
NSG 3040 (discontinued)
Multifunction generator for EFT/Burst (4.8 kV), Surge Combination Wave (4.4 kV), Dips Interrupts and Variations, and Magnetic Field testing. Choice of impulse modules depends on your testing needs.
-
NSG 3040A
Multifunction generator for EFT/Burst (4.8 kV), Surge Combination Wave (4.4 kV), Dips Interrupts and Variations, and Magnetic Field testing. Choice of impulse modules depends on your testing needs.
-
NSG 3060 (discontinued)
Multifunction generator for EFT/Burst (4.8 kV), Surge Combination Wave (6.6 kV), Surge Telecom 10/700, Ring Wave, Dips Interrupts and Variations, and Magnetic Field testing. Choice of impulse modules depends on your testing needs.
-
NSG 3060A
Multifunction generator for EFT/Burst (4.8 kV), Surge Combination Wave (6.6 kV), Dips Interrupts and Variations, Ring Wave (6.6 kV) and Magnetic Field testing. Choice of impulse modules depends on your testing needs.
-
PMU 6003
The PMU 6003 is designed for connection to the USB interface. It includes software that allows multiple power meter readouts at the same time.
-
PCJ 9201
The PCJ 9201 meets all the requirements and provides additionally a save way for measuring the insertion loss of current sensing probes and monitoring probes.
-
WIN 6000
Teseq provides with the WIN 6000 a device control software with NSG 4070 and ITS 6006 for performing conducted and radiated susceptibility tests as defined by international standards.
Products
Applications
Industries
Service
Imprint
AMETEK CTS GmbH
Sternenhofstr. 15
4153 Reinach, Switzerland
Tel.+ 41 61 204 41 00
marketing.cts@ametek.com
Managing Directors:
Brian Huntsman
Astrid Wälchli Schreiber
VAT-ID: CHE-179.452.414
Register of companies: CH-280.4.015.069-3