Back to home
Ametek
 

EN 61000-6-2

  • Product

    Description

     
  • NSG 4070C

    NSG 4070C

    The NSG 4070 is a multi-functional device for carrying out EMC immunity tests to accompany development and conformity testing in accordance to IEC / EN 61000-4-6, Namur and several automotive BCI standards.

  • BHA 9118

    BHA 9118

    The BHA 9118 is a linearly polarised broadband antenna which is ideal for many applications particularly EMC/RF measurements.

  • CBA 1G-030D

    CBA 1G-030D

    1 MHz to 1 GHz 30 Watt Broadband Power Amplifier

  • CBA 1G-100D

    CBA 1G-100D

    1 MHz to 1 GHz 100 Watt Broadband Power Amplifier

  • CBA 1G-150D

    CBA 1G-150D

    80 MHz to 1 GHz 150 Watt Broadband Power Amplifier

  • CBA 1G-300D

    CBA 1G-300D

    80 MHz to 1 GHz 300 Watt Broadband Power Amplifier

  • CBA 1G-600D

    CBA 1G-600D

    80 MHz to 1 GHz 600 Watt Broadband Power Amplifier

  • CBA 1G-1200D

    CBA 1G-1200D

    80 MHz to 1 GHz 1200 Watt Broadband Power Amplifier

  • CBA 3G-050B

    CBA 3G-050B

    800 MHz to 3.1 GHz 50 Watt Broadband Power Amplifier

  • CBA 3G-100B

    CBA 3G-100B

    800 MHz to 3.1 GHz 100 Watt Braodband Power Amplifier

  • CBA 3G-300B

    CBA 3G-300B

    800 MHz to 3.1 GHz 300 Watt Broadband Power Amplifier

  • CBA 3G-500B

    CBA 3G-500B

    800 MHz to 3.1 GHz 500 Watt Broadband Power Amplifier

  • CBA 100M-110

    CBA 100M-110

    10 kHz TO 100 MHz 110 Watt Class A Broadband Amplifier

  • CBA 100M-400

    CBA 100M-400

    10 kHz to 100 MHz 400 Watt Class A Broadband Amplifier

  • CBA 230M-035

    CBA 230M-035

    150 kHz to 230 MHz 35 Watt Class A Broadband Amplifier

  • CBA 230M-080

    CBA 230M-080

    150 kHz to 230 MHz 80 Watt Class A Broadband Amplifier

  • CBA 400M-110

    CBA 400M-110

    10 KHz to 400 MHz 100 Watt Class A Broadband Amplifier

  • CBA 400M-260

    CBA 400M-260

    10 kHz to 400 MHz 260 Watt Class A Broadband Amplifier

  • CBL 6111

    CBL 6111

    The CBL 6111 is a high performance ultra wideband BiLog® antenna for emission and immunity EMC testing.

  • CBL 6112

    CBL 6112

    The CBL 6112 operates over the unprecedented, wide range 30 MHz to 2 GHz.

  • CBL 6141

    CBL 6141

    For RF EMC emission and immunity testing in compact anechoic chambers.

  • CBL 6143

    CBL 6143

    The CBL 6143 has a unique matching network which will allow powers of up to 300 watts CW to be transmitted, making it suitable for most immunity measurements requiring fields of 10 V/m, or even greater.

  • CDN 3043

    CDN 3043

    Three phase automatic 32 A coupling/decoupling networks (CDNs) for EFT/Burst and Surge

  • CBL 6144

    CBL 6144

    The CBL 6144 gives an incredible antenna factor of only 3 dB at 26 MHz together with a useable VSWR making the CBL 6144 able to deliver 10 V/m with 80% AM modulation using an amplifier power of less than 500 W (chamber dependent) at 26 MHz.

  • CDN 3043A

    CDN 3043A

    Three phase automatic 32 A coupling/decoupling networks (CDNs) for EFT/Burst and Surge

  • CDN 3061

    CDN 3061

    Single phase automatic 16 A coupling/decoupling networks (CDNs) for EFT/Burst, Surge, and Power Quality (Dips Interrupts & Variations) testing

  • CDN 3063

    CDN 3063

    Three phase automatic 32, 63 and 100 A coupling/decoupling networks (CDNs) for EFT/Burst and Surge

  • CDN 3063A

    CDN 3063A

    Three phase automatic 32 A coupling/decoupling networks (CDNs) for EFT/Burst and Surge

  • CDN 3083 Burst

    CDN 3083 Burst

    Three phase 690 VAC/1000 VDC 100 and 200 A manual coupling/decoupling networks (CDNs) for EFT/Burst

  • CDN 3083 Surge

    CDN 3083 Surge

    Three phase 440 VAC/DC and 620 VAC/DC 100 and 200 A manual coupling/decoupling networks (CDNs) for Surge

  • CDN AF Series

    CDN AF Series

    CDN AF Series

  • CDN CAN Series

    CDN CAN Series

    CDN CAN Series

  • CDN M Series

    CDN M Series

    CDN M Series

  • CDN S Series

    CDN S Series

    CDN S Series

  • CDN T Series

    CDN T Series

    CDN T Series

  • CIP 9136A

    CIP 9136A

    The CIP 9136 probe has been manufactured to drawings and specifications laid down by QinetiQ.

  • DCP 0100A

    DCP 0100A

    This high power dual directional coupler has been specifically designed for EMC immunity applications.

  • FT 801

    FT 801

    Ferrite tube for immunity test according to IEC / EN 61000-4-6, large diameter of 35 mm

  • IOB 4000

    IOB 4000

    The Input/Output Box, in short IOB 4000, is an ideal addition for electromagnetic immunity test systems.

  • ISN S Series

    ISN S Series

    ISN S series is designed for measurements on coaxial telecommunication lines.

  • ISN T2

    ISN T2

    The ISN T2 is designed for measurements on one unscreened balanced pair for cable cat. 3 and cat. 5.

  • ISN T4

    ISN T4

    The ISN T4 is designed for measurements on one or two unscreened balanced pairs for cable cat. 3 and cat. 5.

  • ISN T8-Cat6

    ISN T8-Cat6

    The ISN T8-Cat6 is designed for measurements on up to four unscreened single balanced pairs with cable category cat. 6.

  • ITS 6006B

    ITS 6006B

    The ITS 6006B consist of an integrated RF signal generator, RF switch and EUT monitoring interfaces. The unit is designed for various radiated EMC applications in the 80 MHz to 6 GHz frequency range.

  • KEMA 801B

    KEMA 801B

    The KEMA 801B is recommended as an additional decoupling network (ferrite tube clamp) for immunity test according to IEC/EN 61000-4-6 when using the clamp injection method.

  • NSG 3040-EFT (discontinued)

    NSG 3040-EFT (discontinued)

    Single function generator for EFT / burst pulses for immunity testing in compliance with IEC 61000-4-4 up to 4.8 kV

  • KEMZ 801

    KEMZ 801

    The normative Annex A of IEC/EN 61000-4-6 gives additional information regarding the clamp injection. The KEMZ 801 is similar to the described EM clamp in the standard and injects the disturbance signal through a combination of inductive and capacitive coupling.

  • MD 4070A

    MD 4070A

    The monitoring device MD 4070 can be used as an active or passive current sensor probe to measure the current in a conductor without connecting it directly.

  • NSG 435 ESD SIMULATOR

    NSG 435 ESD SIMULATOR

    Electrostatic Discharge (ESD) simulator for immunity testing in compliance with IEC 61000-4-2, up to 16.5 kV

  • NSG 437 ESD SIMULATOR

    NSG 437 ESD SIMULATOR

    Electrostatic Discharge (ESD) simulator for immunity testing in compliance with IEC61000-4-2 and ISO10605, up to 30 kV.

  • NSG 438 FLAGSHIP ESD SIMULATOR

    NSG 438 FLAGSHIP ESD SIMULATOR

    Electrostatic Discharge (ESD) simulator for immunity testing in compliance with IEC61000-4-2 and ISO10605, up to 30 kV.

  • NSG 439 ESD SIMULATOR

    NSG 439 ESD SIMULATOR

    Electrostatic Discharge (ESD) simulator for immunity testing in compliance with IEC 61000-4-2 and ISO 10605, up to 30 kV. Designed especially for robotic applications.

  • NSG 3040-DDV (discontinued)

    NSG 3040-DDV (discontinued)

    Single function generator for single phase Dips Interrupts & Variations testing up to 270 V/16 A in compliance with IEC 61000-4-11 and IEC 61000-4-29

  • NSG 3040 (discontinued)

    NSG 3040 (discontinued)

    Multifunction generator for EFT/Burst (4.8 kV), Surge Combination Wave (4.4 kV), Dips Interrupts and Variations, and Magnetic Field testing. Choice of impulse modules depends on your testing needs.

  • NSG 3040A

    NSG 3040A

    Multifunction generator for EFT/Burst (4.8 kV), Surge Combination Wave (4.4 kV), Dips Interrupts and Variations, and Magnetic Field testing. Choice of impulse modules depends on your testing needs.

  • NSG 3040-CWS (discontinued)

    NSG 3040-CWS (discontinued)

    Single function generator for Surge Combination Wave pulses for immunity testing in compliance with IEC 61000-4-5 up to 4.4 kV

  • NSG 3060 (discontinued)

    NSG 3060 (discontinued)

    Multifunction generator for EFT/Burst (4.8 kV), Surge Combination Wave (6.6 kV), Surge Telecom 10/700, Ring Wave, Dips Interrupts and Variations, and Magnetic Field testing. Choice of impulse modules depends on your testing needs.

  • NSG 3060A

    NSG 3060A

    Multifunction generator for EFT/Burst (4.8 kV), Surge Combination Wave (6.6 kV), Dips Interrupts and Variations, Ring Wave (6.6 kV) and Magnetic Field testing. Choice of impulse modules depends on your testing needs.

  • NSG 3060-ANSI (discontinued)

    NSG 3060-ANSI (discontinued)

    Multifunction generator for Surge Combination Wave, Ring Wave, and EFT/Burst, for IEC and ANSI C62.41 & 45 testing.

  • NSG 3060-ITU (discontinued)

    NSG 3060-ITU (discontinued)

    Multifunction generator for Surge Combination Wave, Telecom Surge, and EFT/Burst, for IEC and ITU-T.K series testing.

  • PMU 6003

    PMU 6003

    The PMU 6003 is designed for connection to the USB interface. It includes software that allows multiple power meter readouts at the same time.

  • PCJ 9201

    PCJ 9201

    The PCJ 9201 meets all the requirements and provides additionally a save way for measuring the insertion loss of current sensing probes and monitoring probes.

  • WIN 6000

    WIN 6000

    Teseq provides with the WIN 6000 a device control software with NSG 4070 and ITS 6006 for performing conducted and radiated susceptibility tests as defined by international standards.

  • NSG 3150

    NSG 3150

    Single function generator for Surge Combination Wave pulses for immunity testing in compliance with IEC 61000-4-5 up to 15 kV

 
 
 

Imprint

AMETEK CTS GmbH
Sternenhofstr. 15
4153 Reinach, Switzerland
Tel.+ 41 61 204 41 00
marketing.cts@ametek.com

Managing Directors:
Brian Huntsman
Astrid Wälchli Schreiber
VAT-ID: CHE-179.452.414
Register of companies: CH-280.4.015.069-3


 
 
By continuing to use the site, you agree to our Privacy and Cookie Policy.