The NSG 4070 is a multi-functional device for carrying out EMC immunity tests to accompany development and conformity testing in accordance to IEC / EN 61000-4-6, Namur and several automotive BCI standards. Anyone who spends a considerable amount of time on test level setting, connecting EUT monitoring or writing test reports can now carry out immunity testing in a much more efficient manner with the 4th generation of NSG 4070.
Its modular set-up using internal or external amplifiers enables a large variety of applications. The powerful and easy to use firmware makes the NSG 4070 independent from an external PC and control software, however it can also be remote controlled for system operation. A state-of-the-art data transfer of test and measurement data for documentation is provided by USB stick to be plugged into the front panel.
Frequency range: 4 kHz – 1 GHz
Level range: -60 dBm to +10 dBm
Modulation depth: 0 – 100%
Rise / fall time (10% / 90%): < 1 μs
Delay time: < 1 μs / 180°
Compact immunity test system NSG 4070C, 4 kHz - 1 GHz RF generator and power meter (without power amplifier)
Compact immunity test system NSG 4070C, 4 kHz - 1 GHz RF generator and power meter (with integrated power amplifier 35 W module 150 kHz - 230 MHz)
Compact immunity test system NSG 4070C, 4 kHz - 1 GHz RF generator and power meter (with integrated power amplifier 40 W module 10 kHz - 400 MHz)
Compact immunity test system NSG 4070C, 4 kHz - 1 GHz RF generator and power meter (with integrated power amplifier 45 W module 9 kHz - 1 GHz)
Compact immunity test system NSG 4070C, 4 kHz - 1 GHz RF generator, 4 kHz to 1 GHz 5-channel power meter (3 inputs, 2 used internal), 60 W power ampl. module 10 kHz to 400 MHz (>10 W 4 to 10 kHz)
Compact immunity test system NSG 4070C, 4 kHz - 1 GHz RF generator and power meter (with integrated power amplifier 80 W module 150 kHz - 230 MHz)
1 MHz to 400 MHz 100 Watt Class A Broadband Amplifier
10 kHz to 400 MHz 260 Watt Class A Broadband Amplifier
Teseq provides with the WIN 6000 a device control software with NSG 4070 and ITS 6006 for performing conducted and radiated susceptibility tests as defined by international standards.
The monitoring device MD 4070 can be used as an active or passive current sensor probe to measure the current in a conductor without connecting it directly.
The SW 4070 allows to switch the signal paths for having a remote controlled system and is fully powered and controlled by the NSG 4070.
6 dB - 50 Ω attenuators, particularly for minimising reflection losses in tests per IEC/EN 61000-4-6 also useful for general purposes.
The Input/Output Box, in short IOB 4000, is an ideal addition for electromagnetic immunity test systems.
This high power dual directional coupler has been specifically designed for EMC immunity applications.
Baluns for ISO / DTS 7637-4, MBN 10284‑3
Calibration set for BAL 4070
AMETEK CTS GmbH
4153 Reinach, Switzerland
Tel.+ 41 61 204 41 00
Astrid Wälchli Schreiber
Register of companies: CH-280.4.015.069-3