Product
Description
The NSG 4070 is a multi-functional device for carrying out EMC immunity tests to accompany development and conformity testing in accordance to IEC / EN 61000-4-6, Namur and several automotive BCI standards.
The BHA 9118 is a linearly polarised broadband antenna which is ideal for many applications particularly EMC/RF measurements.
1 MHz to 1 GHz 30 Watt Broadband Power Amplifier
1 MHz to 1 GHz 70 Watt Broadband Power Amplifier
80 MHz to 1 GHz 150 Watt Broadband Power Amplifier
80 MHz to 1 GHz 300 Watt Broadband Power Amplifier
80 MHz to 1 GHz 600 Watt Broadband Power Amplifier
80 MHz to 1 GHz 1200 Watt Broadband Power Amplifier
800 MHz to 3.1 GHz 50 Watt Broadband Power Amplifier
800 MHz to 3.1 GHz 100 Watt Braodband Power Amplifier
800 MHz to 3.1 GHz 300 Watt Broadband Power Amplifier
800 MHz to 3.1 GHz 500 Watt Broadband Power Amplifier
1 GHz to 6 GHz 30 Watt Single Band Power Amplifier
1.8 GHz to 6 GHz 40 Watt Single Band Power Amplifier
1 GHz to 6 GHz 50 Watt Single Band Power Amplifier
1 GHz to 6 GHz 50 Watt Single Band Power Amplifier
1.8 GHz to 6 GHz 80 Watt Single Band Power Amplifier
1 GHz to 6 GHz 100 Watt Single Band Power Amplifier
1.8 GHz to 6 GHz 120 Watt Single Band Power Amplifier
1 GHz to 6 GHz 200 Watt Single Band Power Amplifier
10 kHz TO 100 MHz 110 Watt Class A Broadband Amplifier
10 kHz to 100 MHz 400 Watt Class A Broadband Amplifier
150 kHz to 230 MHz 35 Watt Class A Broadband Amplifier
150 kHz to 230 MHz 22 Watt Class A Broadband Amplifier
1 MHz to 400 MHz 100 Watt Class A Broadband Amplifier
10 kHz to 400 MHz 260 Watt Class A Broadband Amplifier
The CBL 6111 is a high performance ultra wideband BiLog® antenna for emission and immunity EMC testing.
The CBL 6112 operates over the unprecedented, wide range 30 MHz to 2 GHz.
For RF EMC emission and immunity testing in compact anechoic chambers.
The CBL 6143 has a unique matching network which will allow powers of up to 300 watts CW to be transmitted, making it suitable for most immunity measurements requiring fields of 10 V/m, or even greater.
The CBL 6144 gives an incredible antenna factor of only 3 dB at 26 MHz together with a useable VSWR making the CBL 6144 able to deliver 10 V/m with 80% AM modulation using an amplifier power of less than 500 W (chamber dependent) at 26 MHz.
Reproducible emissions measurements require a defined line termination for the frequency range where connected lines provide a significant influence on the emissions.
Reproducible emissions measurements require a defined line termination for the frequency range where connected lines provide a significant influence on the emissions.
Compliance 5 is sophisticated EMC laboratory control software designed to make RF Susceptibility/Immunity testing fast, efficient, compliant, accurate and simple.
Ferrite tube for immunity test according to IEC / EN 61000-4-6, large diameter of 35 mm
GTEM 5I for use in RF Susceptibility/Immunity testing in a GTEM cell.
The GTEM 250 has a maximum septum height of 250 mm and is suitable for emissions and immunity testing.
GTEM with septum height 250 mm, 100 W, low VSWR, vertical position
The GTEM 500 has a maximum septum height of 500 mm and is suitable for emissions and immunity testing.
The GTEM 750 has a maximum septum height of 750 mm and is suitable for emissions and immunity testing.
The GTEM 1000 has a maximum septum height of 1000 mm and is suitable for emissions and immunity testing.
The GTEM 1250 has a maximum septum height of 1250 mm and is suitable for emissions and immunity testing.
The transversal electromagnetic mode which can developed in the DTEM cell, provides the opportunity for doing EMC testing inside the cell.
The GTEM 1500 has a maximum septum height of 1500 mm and is suitable for emissions and immunity testing.
The GTEM 1750 has a maximum septum height of 1750 mm and is suitable for emissions and immunity testing.
The GTEM 2000 has a maximum septum height of 2000 mm and is suitable for emissions and immunity testing.
The Input/Output Box, in short IOB 4000, is an ideal addition for electromagnetic immunity test systems.
The ITS 6006B consist of an integrated RF signal generator, RF switch and EUT monitoring interfaces. The unit is designed for various radiated EMC applications in the 80 MHz to 6 GHz frequency range.
The KEMA 801 is recommended as an additional decoupling network (ferrite tube clamp) for immunity test according to IEC/EN 61000-4-6 when using the clamp injection method.
The PMU 6003 is designed for connection to the USB interface. It includes software that allows multiple power meter readouts at the same time.
The PMR 6006 is designed for direct connection to the ITS 6006 Immunity Test System. Up to three power meters can be connected.
The PMU 6006 is designed for connection to the USB interface. It includes software that allows multiple power meter readouts at the same time.
Reverberation Chambers (RCs) are modern EMC test environments in addition to the established methods like semi- or full anechoic rooms, open area test sites or (G)TEM cells.
Reverberation Chambers (RCs) are modern EMC test environments in addition to the established methods like semi- or full anechoic rooms, open area test sites or (G)TEM cells.
Stirrer size L, remote controlled, incl. gear motor for step-wise and continuous rotation, positioning accuracy +/- 0.5°, smallest step 0.1°, motor installed inside chamber, specified up to 600 V/m CW, incl. EMC filter, cables and stirrer control unit with remote interface and driver for C5I software
Stirrer size M, remote controlled, incl. gear motor for step-wise and continuous rotation, positioning accuracy +/- 0.5°, smallest step 0.1°, motor installed inside chamber, specified up to 600 V/m CW, incl. EMC filter, cables and stirrer control unit with remote interface and driver for C5I software
Stirrer size S, remote controlled, incl. gear motor for step-wise and continuous rotation, positioning accuracy +/- 0.5°, smallest step 0.1°, motor installed inside chamber, specified up to 600 V/m CW, incl. EMC filter, cables and stirrer control unit with remote interface and driver for C5I software
RF Switch Network
The transversal electromagnetic mode which can be developped in the SL 50 strip line, provides the opportunity for doing EMC testing inside the strip line.
The transversal electromagnetic mode which can be developped in the SL 90 strip line, provides the opportunity for doing EMC testing inside the strip line.
The transversal electromagnetic mode which can be developped in the SL 150 strip line, provides the opportunity for doing EMC testing inside the strip line.
The SW 4070 allows to switch the signal paths for having a remote controlled system and is fully powered and controlled by the NSG 4070.
The Teseq TEM horn for IEC / EN 61000-4-39 generates homogeneous fields in the large frequency range from 600 MHz to 6 GHz. Two optional available matching network adapters allow to extend the frequency range for the TETRA 400 and GMRS 460 / FRS 460 applications. Using the adapters means one TEM horn for all the bands.
Tri-Plate Line 10 kHz to 1 GHz
Teseq provides with the WIN 6000 a device control software with NSG 4070 and ITS 6006 for performing conducted and radiated susceptibility tests as defined by international standards.
AMETEK CTS GmbH
Sternenhofstr. 15
4153 Reinach, Switzerland
Tel.+ 41 61 204 41 00
marketing.cts@ametek.com
Managing Directors:
Brian Huntsman
Astrid Wälchli Schreiber
VAT-ID: CHE-179.452.414
Register of companies: CH-280.4.015.069-3