Back to home
Ametek
 

CISPR 25

  • Product

    Description

     
  • BHA 9118

    BHA 9118

    The BHA 9118 is a linearly polarised broadband antenna which is ideal for many applications particularly EMC/RF measurements.

  • CSP 9160

    CSP 9160

    The CSP 9160 is a broadband RF current sensor probe as defined in CISPR 16-1-2. Beside the compliance measurements of asymmetrical disturbance currents as e.g. required in CISPR 16-2-1 and CISPR 22, the probe can be used in a number of diagnostic applications to measure superimposed RF currents flowing in conductors, or cable harnesses.

  • HV-AN 150

    HV-AN 150

    The artificial network HV-AN 150 covers several applications and standards in the Automotive, Airborne and MIL range. It
    offers the right solution for both high current and high voltage EUTs.

  • HV-AN S150

    HV-AN S150

    The artificial network HV-AN S150 offers a solution for high current, high voltage and shielded connections to the EUT.

  • KSQ 1000

    KSQ 1000

    The KSQ 1000 is a special version of reference radiation source for the frequency range 30 MHz to 1 GHz.

  • LNA 6000

    LNA 6000

    The LNA 6000 is a low noise amplifier with 12.5 dB of gain covering the nominal frequency range 1 MHz to 3 GHz and can be used in the range from 200 kHz to 4 GHz.

  • LNA 6900

    LNA 6900

    The LNA 6900 is a low noise amplifier with 25 dB of gain covering the nominal frequency range 9 kHz to 2 GHz and can be used up to 4 GHz.

  • LNA 6901

    LNA 6901

    The LNA 6901 is a low noise amplifier with typ. 28 dB of gain covering the nominal frequency range 9 kHz to 1 GHz and can be used up to 2 GHz.

  • LNA 6018

    LNA 6018

    The LNA 6018 is a low noise amplifier with typ. 22 dB of gain covering the nominal frequency range 1 GHz to 18 GHz.

  • NNB 51

    NNB 51

    Line impedance stabilization network (LISN) such as the NNB 51 are used to measure distortion signals on the mains cord of an electrical equipment under test (EUT).

  • NNB 52

    NNB 52

    Line impedance stabilization network (LISN) such as the NNB 52 are used to measure distortion signals on the mains cord of an electrical equipment under test (EUT).

  • DTEM

    DTEM

    The transversal electromagnetic mode which can developed in the DTEM cell, provides the opportunity for doing EMC testing inside the cell.

  • RSG 1000

    RSG 1000

    The RSG 1000 is a reference spectrum generator for the frequency range from 1 MHz to 1 GHz.

  • RSG 2000

    RSG 2000

    The RSG 2000 is a reference spectrum generator covering the frequency range of 1 to 18 GHz.

  • RSG 3000

    RSG 3000

    The RSG 3000 is a reference spectrum generator for the frequency range from 1 MHz to 6 GHz.

  • SL 50

    SL 50

    The transversal electromagnetic mode which can be developped in the SL 50 strip line, provides the opportunity for doing EMC testing inside the strip line.

  • SL 90

    SL 90

    The transversal electromagnetic mode which can be developped in the SL 90 strip line, provides the opportunity for doing EMC testing inside the strip line.

  • UPA 6108

    UPA 6108

    The UPA 6108 and UPA 6109, suitable for CISPR/IEC/EN, FCC, MIL-STD testing, are small yet rugged antennas covering the frequency range 200 MHz - 1 GHz (UPA 6109), and 300 MHz - 1 GHz (UPA 6108).

  • UPA 6109

    UPA 6109

    The UPA 6108 and UPA 6109, suitable for CISPR/IEC/EN, FCC, MIL-STD testing, are small yet rugged antennas covering the frequency range 200 MHz - 1 GHz (UPA 6109), and 300 MHz - 1 GHz (UPA 6108).

  • VBA 6106

    VBA 6106

    The VBA 6106A is suitable for CISPR/EN, FCC and MIL-STD testing across the frequency range 30-300 MHz.

  • VSQ 1000

    VSQ 1000

    The VSQ 1000 is a radiation source for the frequency range from 30 MHz to 1 GHz.

  • VSQ 2000

    VSQ 2000

    The VSQ 2000 is an RF radiation source covering the frequency range of 1 - 18 GHz.

  • VSQ 3000

    VSQ 3000

    The VSQ 3000 (VSQ 3002) is a radiation source for the frequency range from 800 MHz (30 MHz) to 3 GHz.