Back to home
Ametek
 

Telecommunications

  • Product

    Description

     
  • ATN Series

    ATN Series

    6 dB - 50 Ω attenuators, particularly for minimising reflection losses in tests per IEC/EN 61000-4-6 also useful for general purposes.

  • BHA 9118

    BHA 9118

    The BHA 9118 is a linearly polarised broadband antenna which is ideal for many applications particularly EMC/RF measurements.

  • BHA 9220

    BHA 9220

    The BHA 9220 is a linearly polarised broadband antenna which is ideal for many applications particularly EMC/RF measurements. It can be used for both receiving and transmitting.

  • CBA 1G-018

    CBA 1G-018

    100 kHz to 1 GHz 18 Watt Class A Broadband Amplifier

  • CBA 1G-070

    CBA 1G-070

    10 MHz to 1 GHz 70 Watt Class A Broadband Amplifier

  • CBA 1G-150

    CBA 1G-150

    80 MHz to 1 GHz 150 Watt Class A Broadband Amplifier

  • CBA 1G-275

    CBA 1G-275

    80 MHz to 1 GHz 275 Watt Class A Broadband Amplifier

  • CBA 1G-500

    CBA 1G-500

    80 MHz to 1 GHz 500 Watt Class A Broadband Amplifier

  • CBA 1G-1000

    CBA 1G-1000

    80 MHz to 1 GHz 1000 Watt Class A Broadband Amplifier

  • CBA 3G-012

    CBA 3G-012

    800 MHz to 3.1 GHz 12 Watt Class A Broadband Amplifier

  • CBA 3G-025

    CBA 3G-025

    800 MHz to 3.1 GHz 25 Watt Class A Broadband Amplifier

  • CBA 3G-050

    CBA 3G-050

    800 MHz to 3.1 GHz 50 Watt Class A Broadband Amplifier

  • CBA 3G-100

    CBA 3G-100

    800 MHz to 3.1 GHz 100 Watt Class A Braodband Amplifier

  • NSG 4070

    NSG 4070

    The NSG 4070 is a multifunctional EMC immunity test system.

  • CBA 3G-180

    CBA 3G-180

    800 MHz to 3.1 GHz 180 Watt Class A Broadband Amplifier

  • CBA 3G-300

    CBA 3G-300

    800 MHz to 3.1 GHz 300 Watt Class A Broadband Amplifier

  • CBA 3G-450

    CBA 3G-450

    800 MHz to 3.1 GHz 450 Watt Class A Broadband Amplifier

  • CBA 100M-110

    CBA 100M-110

    10 kHz TO 100 MHz 110 Watt Class A Broadband Amplifier

  • CBA 100M-400

    CBA 100M-400

    10 kHz to 100 MHz 400 Watt Class A Broadband Amplifier

  • CBA 100M-1100

    CBA 100M-1100

    10 kHz to 100 MHz 1100 Watt Class A Broadband Amplifier

  • CBA 230M-022

    CBA 230M-022

    150 kHz to 230 MHz 22 Watt Class A Broadband Amplifier

  • CBA 230M-035

    CBA 230M-035

    150 kHz to 230 MHz 35 Watt Class A Broadband Amplifier

  • CBA 230M-080

    CBA 230M-080

    150 kHz to 230 MHz 80 Watt Class A Broadband Amplifier

  • CBA 400M-100

    CBA 400M-100

    1 MHz to 400 MHz 100 Watt Class A Broadband Amplifier

  • CBA 400M-110

    CBA 400M-110

    10 kHz to 400 MHz 110 Watt Class A Broadband Amplifier

  • CBA 400M-260

    CBA 400M-260

    10 kHz to 400 MHz 260 Watt Class A Broadband Amplifier

  • CBL 6111

    CBL 6111

    The CBL 6111 is a high performance ultra wideband BiLog® antenna for emission and immunity EMC testing.

  • CBL 6112

    CBL 6112

    The CBL 6112 operates over the unprecedented, wide range 30 MHz to 2 GHz.

  • CBL 6141

    CBL 6141

    For RF EMC emission and immunity testing in compact anechoic chambers.

  • CBL 6143

    CBL 6143

    The CBL 6143 has a unique matching network which will allow powers of up to 300 watts CW to be transmitted, making it suitable for most immunity measurements requiring fields of 10 V/m, or even greater.

  • CDN 3043

    CDN 3043

    Three phase automatic 32 A coupling/decoupling networks (CDNs) for EFT/Burst and Surge

  • CDN 3061

    CDN 3061

    Single phase automatic 16 A coupling/decoupling networks (CDNs) for EFT/Burst, Surge, and Power Quality (Dips Interrupts & Variations) testing

  • CDN 3063

    CDN 3063

    Three phase automatic 32, 63 and 100 A coupling/decoupling networks (CDNs) for EFT/Burst and Surge

  • CBL 6144

    CBL 6144

    The CBL 6144 gives an incredible antenna factor of only 3 dB at 26 MHz together with a useable VSWR making the CBL 6144 able to deliver 10 V/m with 80% AM modulation using an amplifier power of less than 500 W (chamber dependent) at 26 MHz.

  • CDN 3083 Burst

    CDN 3083 Burst

    Three phase 690 VAC/1000 VDC 100 and 200 A manual coupling/decoupling networks (CDNs) for EFT/Burst

  • CDN 3083 Surge

    CDN 3083 Surge

    Three phase 440 VAC/DC and 620 VAC/DC 100 and 200 A manual coupling/decoupling networks (CDNs) for Surge

  • CDN AF Series

    CDN AF Series

    CDN AF Series

  • CDN CAN Series

    CDN CAN Series

    CDN CAN Series

  • CDN M Series

    CDN M Series

    CDN M Series

  • CDN S Series

    CDN S Series

    CDN S Series

  • CDN T Series

    CDN T Series

    CDN T Series

  • CHA 9652

    CHA 9652

    This high power dual directional coupler has been specifically designed for EMC immunity applications.

  • CIP 9136

    CIP 9136

    The CIP 9136 probe has been manufactured to drawings and specifications laid down by QinetiQ.

  • CFL 9206

    CFL 9206

    The CFL 9206 assists in preventing damage to input circuits of measuring equipment from high level transients often encountered during conducted emission testing.

  • CMAD 10

    CMAD 10

    Reproducible emissions measurements require a defined line termination for the frequency range where connected lines provide a significant influence on the emissions.

  • CMAD 20

    CMAD 20

    Reproducible emissions measurements require a defined line termination for the frequency range where connected lines provide a significant influence on the emissions.

  • Compliance 5 Emission

    Compliance 5 Emission

    Compliance 5 is sophisticated EMC laboratory control software designed to make RF Emission and Susceptibility/Immunity testing fast, efficient, compliant, accurate and simple.

  • Compliance 5 Immunity

    Compliance 5 Immunity

    Compliance 5 is sophisticated EMC laboratory control software designed to make RF Emission and Susceptibility/Immunity testing fast, efficient, compliant, accurate and simple.

  • CSP 9160

    CSP 9160

    The CSP 9160 is a broadband RF current sensor probe as defined in CISPR 16-1-2. Beside the compliance measurements of asymmetrical disturbance currents as e.g. required in CISPR 16-2-1 and CISPR 22, the probe can be used in a number of diagnostic applications to measure superimposed RF currents flowing in conductors, or cable harnesses.

  • CVP 2200

    CVP 2200

    The Capacitive Voltage Probe (CVP) is designed for measuring asymmetrical disturbances on cables with capacitive coupling principle.

  • DCP 0100

    DCP 0100

    This high power dual directional coupler has been specifically designed for EMC immunity applications.

  • DPA 3000

    DPA 3000

    The dipole antenna DPA 3000 operates as a field strength measuring antenna in the frequency range 800 to 2800 (3000*) MHz.

  • DPA 4000

    DPA 4000

    The dipole antenna DPA 4000A operates as a field strength measuring antenna in the frequency range 200 (30*) to 1000 MHz.

  • EmiPak 5

    EmiPak 5

    Compliance 5 is sophisticated EMC laboratory control software designed to make RF Emission and Susceptibility/Immunity testing fast, efficient, compliant, accurate and simple.

  • GTEM 5 Emission

    GTEM 5 Emission

    Compliance 5 is sophisticated EMC laboratory control software designed to make RF Emission and Susceptibility/Immunity testing fast, efficient, compliant, accurate and simple.

  • GTEM 5 Immunity

    GTEM 5 Immunity

    Compliance 5 is sophisticated EMC laboratory control software designed to make RF Emission and Susceptibility/Immunity testing fast, efficient, compliant, accurate and simple.

  • GTEM 250

    GTEM 250

    The GTEM 250 has a maximum septum height of 250 mm and is suitable for emissions and immunity testing.

  • GTEM 500

    GTEM 500

    The GTEM 500 has a maximum septum height of 500 mm and is suitable for emissions and immunity testing.

  • GTEM 750

    GTEM 750

    The GTEM 750 has a maximum septum height of 750 mm and is suitable for emissions and immunity testing.

  • GTEM 1000

    GTEM 1000

    The GTEM 1000 has a maximum septum height of 1000 mm and is suitable for emissions and immunity testing.

  • GTEM 1250

    GTEM 1250

    The GTEM 1250 has a maximum septum height of 1250 mm and is suitable for emissions and immunity testing.

  • DTEM

    DTEM

    The transversal electromagnetic mode which can developed in the DTEM cell, provides the opportunity for doing EMC testing inside the cell.

  • GTEM 1500

    GTEM 1500

    The GTEM 1500 has a maximum septum height of 1500 mm and is suitable for emissions and immunity testing.

  • GTEM 1750

    GTEM 1750

    The GTEM 1750 has a maximum septum height of 1750 mm and is suitable for emissions and immunity testing.

  • GTEM 2000

    GTEM 2000

    The GTEM 2000 has a maximum septum height of 2000 mm and is suitable for emissions and immunity testing.

  • IOB 4000

    IOB 4000

    The Input/Output Box, in short IOB 4000, is an ideal addition for electromagnetic immunity test systems.

  • ISN PLT Series

    ISN PLT Series

    The ISN PLT is made for measurements on PLT devices which use one port for mains power supply and telecommunications (PLT port).

  • ISN S Series

    ISN S Series

    ISN S Series

  • ISN T2

    ISN T2

    ISN T2

  • ISN T4

    ISN T4

    ISN T Series

  • ISN T8-Cat6

    ISN T8-Cat6

    ISN T8-Cat6

  • ISN T8

    ISN T8

    ISN T8

  • ITS 6006

    ITS 6006

    The ITS 6006 consist of an integrated RF signal generator, RF switch and EUT monitoring interfaces. The unit is designed for various radiated EMC applications in the 80 MHz to 6 GHz frequency range.

  • KEMA 801

    KEMA 801

    The KEMA 801 is recommended as an additional decoupling network (ferrite tube clamp) for immunity test according to IEC/EN 61000-4-6 when using the clamp injection method.

  • KEMZ 801

    KEMZ 801

    The normative Annex A of IEC/EN 61000-4-6 gives additional information regarding the clamp injection. The KEMZ 801 is similar to the described EM clamp in the standard and injects the disturbance signal through a combination of inductive and capacitive coupling.

  • KSQ 1000

    KSQ 1000

    The KSQ 1000 is a special version of reference radiation source for the frequency range 30 MHz to 1 GHz.

  • LNA 6000

    LNA 6000

    The LNA 6000 is a low noise amplifier with 12.5 dB of gain covering the nominal frequency range 1 MHz to 3 GHz and can be used in the range from 200 kHz to 4 GHz.

  • LNA 6900

    LNA 6900

    The LNA 6900 is a low noise amplifier with 25 dB of gain covering the nominal frequency range 9 kHz to 2 GHz and can be used up to 4 GHz.

  • LNA 6901

    LNA 6901

    The LNA 6901 is a low noise amplifier with typ. 28 dB of gain covering the nominal frequency range 9 kHz to 1 GHz and can be used up to 2 GHz.

  • LNA 6018

    LNA 6018

    The LNA 6018 is a low noise amplifier with typ. 22 dB of gain covering the nominal frequency range 1 GHz to 18 GHz.

  • MD 4070

    MD 4070

    The monitoring device MD 4070 can be used as an active or passive current sensor probe to measure the current in a conductor without connecting it directly.

  • NFPS 1

    NFPS 1

    A diagnostic “tool kit” for use in both electrical and mechanical environments featuring three hand held probes (two magnetic, one electric) covering the frequency range 9 kHz to 1 GHz together with a 30 dB pre-amplifier, power adaptor and check jig.

  • NNB 51

    NNB 51

    Line impedance stabilization network (LISN) such as the NNB 51 are used to measure distortion signals on the mains cord of an electrical equipment under test (EUT).

  • NNB 52

    NNB 52

    Line impedance stabilization network (LISN) such as the NNB 52 are used to measure distortion signals on the mains cord of an electrical equipment under test (EUT).

  • NSG 435 ESD SIMULATOR

    NSG 435 ESD SIMULATOR

    Electrostatic Discharge (ESD) simulator for immunity testing in compliance with IEC 61000-4-2, up to 16.5 kV

  • NSG 437 ESD SIMULATOR

    NSG 437 ESD SIMULATOR

    Electrostatic Discharge (ESD) simulator for immunity testing in compliance with IEC61000-4-2 and ISO10605, up to 30 kV.

  • NSG 438 FLAGSHIP ESD SIMULATOR

    NSG 438 FLAGSHIP ESD SIMULATOR

    Electrostatic Discharge (ESD) simulator for immunity testing in compliance with IEC61000-4-2 and ISO10605, up to 30 kV.

  • NSG 439 ESD SIMULATOR

    NSG 439 ESD SIMULATOR

    Electrostatic Discharge (ESD) simulator for immunity testing in compliance with IEC 61000-4-2 and ISO 10605, up to 30 kV. Designed especially for robotic applications.

  • NSG 3040

    NSG 3040

    Multifunction generator for EFT/Burst (4.8 kV), Surge Combination Wave (4.4 kV), Surge Telecom 10/700, Dips Interrupts and Variations, and Magnetic Field testing. Choice of impulse modules depends on your testing needs.

  • NSG 3025

    NSG 3025

    Single function generator for EFT / burst pulses for immunity testing in compliance with IEC61000-4-4 up to 4.8 kV

  • NSG 3060

    NSG 3060

    Multifunction generator for EFT/Burst (4.8 kV), Surge Combination Wave (6.6 kV), Surge Telecom 10/700, Ring Wave, Dips Interrupts and Variations, and Magnetic Field testing. Choice of impulse modules depends on your testing needs.

  • PCJ 9201

    PCJ 9201

    The PCJ 9201 meets all the requirements and provides additionally a save way for measuring the insertion loss of current sensing probes and monitoring probes.

  • PMU 6003

    PMU 6003

    The PMU 6003 is designed for connection to the USB interface. It includes software that allows multiple power meter readouts at the same time.

  • PMR 6006

    PMR 6006

    The PMR 6006 is designed for direct connection to the ITS 6006 Immunity Test System. Up to three power meters can be connected.

  • PMU 6006

    PMU 6006

    The PMU 6006 is designed for connection to the USB interface. It includes software that allows multiple power meter readouts at the same time.

  • RC Chamber 2XS

    RC Chamber 2XS

    Reverberation Chambers (RCs) are modern EMC test environments in addition to the established methods like semi- or full anechoic rooms, open area test sites or (G)TEM cells.

  • RC Chamber XS

    RC Chamber XS

    Reverberation Chambers (RCs) are modern EMC test environments in addition to the established methods like semi- or full anechoic rooms, open area test sites or (G)TEM cells.

  • RC Stirrer L

    RC Stirrer L

    Stirrer size L, remote controlled, incl. gear motor for step-wise and continuous rotation, positioning accuracy +/- 0.5°, smallest step 0.1°, motor installed inside chamber, specified up to 600 V/m CW, incl. EMC filter, cables and stirrer control unit with remote interface and driver for C5I software

  • RC Stirrer M

    RC Stirrer M

    Stirrer size M, remote controlled, incl. gear motor for step-wise and continuous rotation, positioning accuracy +/- 0.5°, smallest step 0.1°, motor installed inside chamber, specified up to 600 V/m CW, incl. EMC filter, cables and stirrer control unit with remote interface and driver for C5I software

  • RC Stirrer S

    RC Stirrer S

    Stirrer size S, remote controlled, incl. gear motor for step-wise and continuous rotation, positioning accuracy +/- 0.5°, smallest step 0.1°, motor installed inside chamber, specified up to 600 V/m CW, incl. EMC filter, cables and stirrer control unit with remote interface and driver for C5I software

  • RFB 2000, RFC 2010 or 2020

    RFB 2000, RFC 2010 or 2020

    RF Switch Network

  • RSG 1000

    RSG 1000

    The RSG 1000 is a reference spectrum generator for the frequency range from 1 MHz to 1 GHz.

  • RSG 2000

    RSG 2000

    The RSG 2000 is a reference spectrum generator covering the frequency range of 1 to 18 GHz.

  • RSG 3000

    RSG 3000

    The RSG 3000 is a reference spectrum generator for the frequency range from 1 MHz to 6 GHz.

  • SL 50

    SL 50

    The transversal electromagnetic mode which can be developped in the SL 50 strip line, provides the opportunity for doing EMC testing inside the strip line.

  • SL 90

    SL 90

    The transversal electromagnetic mode which can be developped in the SL 90 strip line, provides the opportunity for doing EMC testing inside the strip line.

  • SL 150

    SL 150

    The transversal electromagnetic mode which can be developped in the SL 150 strip line, provides the opportunity for doing EMC testing inside the strip line.

  • SW 4070, SW 4070-MAN

    SW 4070, SW 4070-MAN

    The SW 4070 allows to switch the signal paths for having a remote controlled system and is fully powered and controlled by the NSG 4070.

  • SW 6012

    SW 6012

    The SW 6012 adds two SPDT switches to the built-in switching network of the ITS 6006. It is fully powered and controlled by the ITS 6006.

  • UPA 6108

    UPA 6108

    The UPA 6108 and UPA 6109, suitable for CISPR/IEC/EN, FCC, MIL-STD testing, are small yet rugged antennas covering the frequency range 200 MHz - 1 GHz (UPA 6109), and 300 MHz - 1 GHz (UPA 6108).

  • UPA 6109

    UPA 6109

    The UPA 6108 and UPA 6109, suitable for CISPR/IEC/EN, FCC, MIL-STD testing, are small yet rugged antennas covering the frequency range 200 MHz - 1 GHz (UPA 6109), and 300 MHz - 1 GHz (UPA 6108).

  • UPA 6192

    UPA 6192

    The UPA 6192 antenna is hybrid antenna with the characteristics similar to a broad band dipole in the range 30 - 200 MHz and a log periodic antenna in the range 200-2000 MHz.

  • USO 4013

    USO 4013

    The USO 4013 is a fast, universal USB-to-serial converter with an optical and an RS232 port, which can be optionally confi gured as an RS485 port.

  • VBA 6106

    VBA 6106

    The VBA 6106A is suitable for CISPR/EN, FCC and MIL-STD testing across the frequency range 30-300 MHz.

  • VSQ 1000

    VSQ 1000

    The VSQ 1000 is a radiation source for the frequency range from 30 MHz to 1 GHz.

  • VSQ 2000

    VSQ 2000

    The VSQ 2000 is an RF radiation source covering the frequency range of 1 - 18 GHz.

  • VSQ 3000

    VSQ 3000

    The VSQ 3000 (VSQ 3002) is a radiation source for the frequency range from 800 MHz (30 MHz) to 3 GHz.

  • WIN 6000

    WIN 6000

    Teseq provides with the WIN 6000 a device control software with NSG 4070 and ITS 6006 for performing conducted and radiated susceptibility tests as defined by international standards.